Features
~Chain length: 1m
~Hardened version
~Chain link strength: 6 mm
~The chain is available in other lengths and strengths

Securi-Prod Universal Camera Mount Enclosure 115 x 115 x 48mm
20 or 25mm knockouts
ABS thermoplastic polymer
Colour: White
Dimensions: 115mm (L) x 115mm (W) x 48mm (H)

Category 6 (ANSI/TIA/EIA-568-B.2-1) is a cable standard for Gigabit Ethernet and other network protocols that is backward compatible with the Category 5/5e and Category 3 cable standards. Category 6 features more stringent specifications for crosstalk and system noise. The cable standard is suitable for 10BASE-T / 100BASE-TX and 1000BASE-T (Gigabit Ethernet) connections. It provides performance of up to 550 MHz.

Cat5e Ethernet cable has the capability to support up to 100Mbps.

Made from 100% Oxygen-Free Copper
24AWG Solid Conductor
Unshielded 4-Twisted Pairs (UTP)
Count-down metre-marking

Product Description
1 Channel 150m Range Sherlo Receiver

Features:

Code-Hopping Encryption
Latch or Momentary
Selectable Momentary times:
1 Sec; 3Sec; 1min; 3min
Buzzer tone
Crystal Controlled +/- 100KHz
Frequencies: 403MHz / 433MHz
12 – 24V AC/DC input

Application:

Gate & Garage Door Access Control
Panic Activations
Arming / Disarming Alarm systems
Switching On / Off lights
Switching On / Off Generators

The Sherlo RX2-150 is a 2 channel receiver which is compatible with all Sherlo 433 Mhz rolling code remote transmitters.
Can operate with latch or momentary pulse. Selectable memory times.

KEY FEATURES
#Sherlo 2 channel receiver
#Master remote program receiver
#Contact no/nc and latching
#Required power 12Vdc – 24Ac required

150 meter range in ideal conditions

Sherlo long range 500m receiver 4 channel
The unit is weatherproof and is supplied with a rubber duck antenna.
This product is suitable for larger sized properties needing the ultimate in performance, quality and range.

KEY FEATURES
Encryption : Code-Hopping
Range : 500m (Open air)
Frequency : 403MHz
Voltage Range : 9.8V to 26V AC/DC
Dimensions (LxBxH) : 187 x 104 x 67mm

Sherlo 1 button remote transmitter with black housing is commonly used on alarm systems. The Sherlo or Sherlotronics are very popular due to their great range commonly 100m plus. The remote uses a super secure code called rolling code, meaning the code sent is never the same. Sherlotronic 1 button remote is perfect for use on gates, garages and alarms. The Sherlotronic remote has a unique clip antenna design increases operating range by 50% the remote also boast approximately 20000 operations on a new battery. The Sherlotronic remotes are also smart, the LED (light) flashes to let you know when the battery is low. Sherlotronic 1 button has multi coloured buttons and a steel key ring attachment so it should never break.

The Centurion Nova Helix 4 Channel Receiver 433 MHz is a 4 channel receiver which can memorize up to 250 buttons and control up to 15 electrical devices such as gate motors, garage door motors, pool pumps and lights.

Centurion Nova 2 channel receiver (blue remotes only)

#Centurion Nova 2 channel format
#Programmable latching and non-latching per channel
#Uses self-learning technology
#Uses stable, narrow band technology to ensure reliable reception
#Self learning memory: 250 remotes per receiver
#433Mhz frequency

Centurion Nova 3 Button Remote

The Nova system incorporates code hopping technology to offer the ultimate security in a remote control
A unique randomly changing code is transmitted with each operation making it impossible to duplicate the system

MAIN FEATURES:

#Durable silicone buttons made to last and last
#Sleek and stylish carbon look.
#433Mhz operating frequency.
#Transmitters with one to four buttons.
#Transmitter quick and easy to open for battery replacement.
#Self-learning receivers with one, two and four channels.
#Receivers incorporate stable narrow band technology.
#Weatherproof housing for receiver.

Blue Centurion Nova 2 button remote transmitter is used on Centurion products such as gate and garage door motors. Getting the Blue Centurion Nova 2 button it to work is easy, just follow the instructions attached. An award winning C-shaped clip design holds the casing of the remote together with out the use of screws. This shape lets you open it, set the code or replace the battery without having to undo screws. while also allowing the user to twist the remote so the buttons are always in the correct position. Blue Centurion Nova 2 button can accommodate a clip with for attaching to a belt or motor vehicle sun visor so that its always in arms reach. This remote is small and compact but still offers great range, normally 100m.

1 button remote control for use with Centurion Nova range of receivers. Compatible with Centurion D5 Evo, X-Trac, D2 Turbo, D10 gate and garage motors any many more devices with Nova receivers installed. 433MHz Keeloq Code Hopping technology. Silicone buttons for durability.

D5 Smart provides the best experience for installers and end-users alike with easy access to mounting hardware and optimised cable management for the neatest installation around.

All the most innovative technological features

#Onboard multichannel NOVA receiver with 1500 button memory
#Wireless and effortless – easy setup and configuration from your smartphone
#24V system capable of performing more operations and offering extended battery backup and power failure autonomy
#New and improved theft-resistant cage with a patented design offering outstanding security and peace of mind
#Vibration sensor that can be connected to a third party device to notify you in the event that the gate motor is being tampered with
#Intelligent battery charger with onboard diagnostics and SMART communication between the charger and the controller
#Improved position control system incorporating hall effect technology – highly resistant to interference
# Individually-configurable inputs and outputs
#Convenient and intuitive single-action manual release

The 18U Wall-Mount Rack Enclosure Cabinet is designed to easy
equipment access, and cable management in IT network applications with limited floor space. Ventilated front door and side panels allow generous airflow to keep equipment operating safely. Adjustable rack rails with
square mounting holes accommodate up to 18U of standard 19′ rackmount equipment. Supports up to 250lbs of equipment. Top and bottom panels include convenient cutouts for cable routing.

The 12U wall mount cabinet provides an essential solution to organizing / storing 19″ equipment, such as patch panels, switches, and more. The wall mount cabinet features cable entry points at the top and bottom for easy routing with a fan hole at the top and vented side panels and front (on all 4 sides) to provide cooling for your equipment. A tempered glass front with keyhole lock secures equipment. Constructed with SPCC cold rolled steel for durability and finished with a black powder coating to prevent grease and corrosion, while complying with RoHS requirements.
Cabinet Dimensions: 600 x 600 x 635mm

High strength steel with a 60kg weight capacity

Vertical rack space: 12u

A 4U rack or cabinet can house equipment whose total height when placed into the rack is no more 7inches or 17.78cm (1.78m) with 1U=1.75inches or 44.45mm. Care therefore has to be taken when selecting a rack to make sure that there cabinet height is sufficient to house the IT server, networking peripheral or IoT device.

A magnetic contact is a door and window sensor that functions using an internal reed switch in conjunction with a magnet. This is the most common way for a door and window sensor to operate. These devices are known for being particularly easy to use and enroll with security systems.